A simple upgrade with a clear purpose: reduce weight without overcomplicating the bike.
The SOKUDO Carbon Thru Axle Kit is a lightweight replacement for standard alloy thru axles, designed for riders looking to remove unnecessary weight while keeping the bike clean and simple.
The kit uses carbon fiber axle bodies combined with interchangeable threaded end pieces, allowing the same set to be configured for a wide range of modern road bike frames and forks.
Rather than being built around a single axle standard, SOKUDO supplies the kit with different M12 thread pitches and lengths, together with adjustment spacers. This gives considerably more flexibility when matching the axles to different bikes.
The finish is equally straightforward: exposed carbon, black hardware and subtle SOKUDO graphics. Once installed, there is very little to see — which is exactly the point.
Carbon Construction
Both the front and rear axle use a carbon fiber main body, providing a lightweight alternative to conventional metal thru axles.
The threaded interfaces remain separate, interchangeable components, allowing the required thread pitch and length to be selected according to the bike.
It's a relatively small component, but for lightweight builds where every gram is considered, the thru axles are another place where weight can be reduced without adding unnecessary complexity.
Multiple Standards, One Kit
Thru-axle standards vary considerably between manufacturers. SOKUDO approaches this with a selection of interchangeable M12 threaded end pieces, covering 1.0, 1.5 and 1.75 mm thread pitches and several different lengths.
The supplied spacers provide an additional level of adjustment, making it possible to fine-tune the axle configuration to suit the frame or fork.
Interchangeable Axle End Pieces
The kit includes 14 interchangeable M12 end pieces covering three common thread pitches and several lengths:
Quantity
Thread
Length
1
M12 × 1.0
17 mm
2
M12 × 1.0
20 mm
2
M12 × 1.0
22 mm
2
M12 × 1.5
15 mm
2
M12 × 1.5
20 mm
2
M12 × 1.5
22 mm
1
M12 × 1.75
17 mm
2
M12 × 1.75
22 mm
What's Included
SOKUDO carbon front thru axle
SOKUDO carbon rear thru axle
14 interchangeable M12 threaded end pieces
M12 × 1.0, 1.5 and 1.75 thread pitch options
Multiple end-piece lengths
Axle adjustment spacers
Installation/removal lever
Extended installation tool
Key Details
Carbon fiber front and rear axle bodies
Lightweight replacement for standard alloy thru axles
Interchangeable threaded interface
Multiple M12 thread standards included
Adjustable configuration using supplied spacers
Precision-machined hardware
Exposed carbon finish
Minimal SOKUDO branding
Front and rear supplied as one complete kit
Installation tools included
Compatibility
There is no universal thru-axle standard. Even bikes using 12 mm thru axles can have different overall lengths, thread pitches and threaded sections.
Before installation, the required axle dimensions should be compared with the bike's original front and rear thru axles. The correct combination of threaded end piece and spacer must be selected for the specific frame and fork.
If you're unsure about compatibility, we recommend checking the specifications of your original axles or contacting us with your bike brand, model and year before ordering.
Note: Product images and descriptions are provided for reference purposes. Actual specifications, finish and included hardware may vary. Always confirm compatibility with your bicycle before installation.
